Standards:

• All Joint Zone flotation bags are developed in accordance with IMCA D-016 standards.

Features:

• Due to the polyester fabric and its EVA/PVC copolymer coating, the material is very flexible and very easy to repair (with glue or a hairdryer with hot air).
• Joint Zone enclosed flotation bags have no sharp corners (they are rounded off and smooth), which makes these enclosed flotation bags more robust and less likely to be damaged.
• Joint Zone enclosed flotation bags are lightweight! Up to 50% lighter than the competition's enclosed flotation bags, while the lift capacity is at least 10% higher.
• The enclosed flotation bags require little maintenance and are very easy to clean.
• Can be used in temperatures as low as -22 degrees Fahrenheit (-30 degrees Celsius).
• Extra TPU coatings can added to increase the strength up to 75% and can increase the cold temperature resistance up to -40 degrees.
• All MSP-1200 pillow style bags and above come standard with an additional ball valve on the bottom of the bag. This additional ball valve provides an additional point to inflate or deflate the bag in the circumstances where the lift bag rotates upside down during a lift.

Top-quality materials and manufacturing:

• NO GLUE is used in the manufacturing process. All patches and seams are RF welded (Radio Frequency welded).
• EVA/PVC copolymer coated polyester fabric - high-strength and heavy-duty.
• Fabric's tensile strength: 8,000 N/5 cm.
• Puncture resistance: 2,150 N (in contrast to competitor's products, which often do not reach more than 1,750 N).
• Resistant to many chemicals.
• High UV-resistance.
• Very easy to repair (with glue or a hairdryer with hot air), unlike materials coated with PU or TPU.
• Highly flexible and lightweight material.
• Equipped with a ¾" stainless steel ball valve.
• Equipped with pressure relief valves.