SP45 4" Hydraulic Submersible Trash Pump

       
       
Brand
 Stanley    Joint Zone Hydraulics
Model
 TP08    SP45
Discharge Size
 4"    4"
Discharge Rate
 800 gpm / 3,028 lpm    793 gpm / 3,000 lpm
Pumpable Solid Dimension
 4 in / 10 cm    3 in / 7 cm
Supply Oil Flow
 7-10 gpm / 26-38 lpm    8-12 gpm / 30-45 lpm
Supply Oil Pressure
 2000 psi / 140 bar    2000 psi / 140 bar 
Max Supply Pressure
 2250 psi / 155 bar    3050 psi / 210 bar
Weight
 63 lbs / 28 1/2 kg    62 lbs / 28 kg
Materials
 Steel volute, cast iron impeller, polyethylene wear plates    Stainless steel - INOX volute, chromium cast iron impeller, urethane wear plates, stainless steel body
Country of Manufacture
 Various    Italy
Notes
 With over 800 gpm of output flow, this pump is capable of pumping high volumes of water, sand slurries gravel, mud and solids up to 4" in diameter. The TP08 is used for dewatering, dredging, cleaning and as an effective bilge pump. The gear motor is direct drive to the cast iron impeller with easy access for clean out of the fabricated steel volute  

SP 45 is a heavy duty professional trash pump designed for pumping slurries, trash waters and thick liquids with density concentration in the fluid up to 25% and suspended solids with dimensions up 3". This pump can be powered by power packs or by the hydraulic circuits of excavators, backhoe loaders, trucks, tractors, and all machines equipped with a sufficient circuit.


THE PUMP BODY IS FABRICATED IN STAINLESS STEEL WITH URETHANE WEAR PLATES, materials that assure hardness, resistance to abrasives, impacts and rust.


This high performance pump proves itself with flow up to 800 gallons/min and water head up to 53 feet. The SP 45 is ideal for large movements of water, during emergencies after floods, for sewage treatment facilities, manhole dewatering, and vessel salvage.

Price
 $2,835.00    $2,525.32

There are no products matching the selection.