CS Unitec 48" Threaded Core Barrel – 2-1/4" diameter

CS Unitec 48" Threaded Core Barrel – 2-1/4" diameter Product Guide

The CS Unitec 48" Threaded Core Barrel is a specialized accessory designed to extend the effective drilling depth when used with compatible electric, pneumatic, or hydraulic core drill rigs. It is engineered to allow deep drilling into reinforced concrete, masonry, and similar tough materials, addressing the challenge of reaching greater depths beyond what the primary core bit or barrel can achieve on its own.

This type of core barrel is commonly employed in construction, demolition, and industrial maintenance applications where penetrations are required through thick concrete walls, floors, or structural elements. It threads onto core bits or other core barrels to add length, enabling contractors or rental customers to complete deep core holes without switching tools or rigs. Selection of the correct barrel length and diameter is critical to match the drill rig’s capabilities and the project’s depth requirements.

Where This Is Used

• Deep drilling through reinforced concrete in commercial and infrastructure projects
• Creating penetrations for plumbing, electrical conduit, or HVAC installations
• Masonry drilling requiring extended core barrel reach
• Industrial maintenance requiring access holes through thick walls or slabs

Key Details

Selection Notes

When selecting a threaded core barrel for deeper core drilling, the important details to confirm are compatibility in diameter and threading with the existing core bit and rig setup. The barrel must match the drill system’s diameter—here, 2-1/4"—and be compatible with electric, pneumatic, or hydraulic power sources depending on the rig used. Consider the barrel length needed to reach the target depth without compromising drill rig stability or creating excessive leverage on the tool mount. Planning for water supply to the drill point is also important, especially for managing dust and slurry when drilling deep cores in concrete or masonry.

Barrel Setup and Compatibility Notes

Proper assembly of the threaded core barrel with the drill bit and any intermediate barrels is critical to maintain concentricity and reduce vibration during drilling. Verify that the threads are clean and free of damage to ensure secure attachment. The extra length increases bending moment on the rig and mounting brackets, so ensure the core drill stand or rig is adequately supported. Check water flow and pressure to the drill point to help control slurry and prevent overheating. After use, clean any concrete slurry and debris from threads and barrel surfaces to maintain reliable connections for subsequent jobs.