The Super-Vee offers you a complete system for cleaning sink, tub and laundry drain lines through 3″ in diameter. With a variety of cables, cutters, and accessories available, you have the right combination for any clogged drain problem.
- Description
-
Details
The Slide Action Chuck™ makes drain cleaning easier. Just pull the Grip Shield back to engage the cable – slide it forward to release. It’s safer than a spinning chuck and it automatically adjusts for different cable diameters. As a result, you get your cable into the line faster, pull it out faster, and have full control at all times.
Quick Change Cable Cartridges make it easy to switch to a different diameter cable. You just loosen three screws, pull the front of the drum off and load another cartridge. Changing takes less than a minute and turns what could be a messy job into a clean one. The drain cleaning machine holds 50 ft. of 1/4” or 5/16”, or 35 ft. of 3/8” Flexicore cables.
The Super-Vee also comes with the new Band-It™ splashguard to minimize excess water spray from the spinning drum.
The Super-Vee is built to clear clogged drains for a decade or more. And our Dyna-Thrust™ bearing system is one reason why. It helps carry the weight of the drum, significantly reducing wear on the motor shaft bearing and extending the life of the tool. Of course, the drain cables are Flexicore® – with an integral wire rope center. Nobody makes cables like General.
Features
- For sinks, tubs and laundry drains
- Slide-Action™ chuck built into grip shield
- Automatically adjusts to different cable diameters
- Quick-change cartridge makes switching cables clean and easy
- Unique Dyna-Thrust™ bearing system for longer tool life.
- Band-It™ splashguard minimizes excess water spray from the spinning drum.
- Holds 50 ft. of 1/4″ or 5/16″, or 35 ft. of 3/8″ Flexicore® cable.
Flexicore wire rope center cables have unequalled strength yet the right amount of flexibility. - Made in U.S.A.
Slide Action Chuck
With a quick movement of the Grip Shield, you release or engage the cable – without the need for a chuck, and with automatic adjustment for different cable diameters. As a result, you get your cable into the line faster, pull it out faster, and have full control at all times. Because the Slide Action Chuck is linked to the Grip Shield, handling is easy and comfortable.
Cartridge Refill
To switch to a different diameter cable (or even connect two 3/8″ cables together), you just loosen three screws, pull the front of the drum off the cable, and load another cartridge. Changing takes less than a minute and turns what could be a messy job into a clean one. The tough plastic cartridges are so inexpensive, you’ll probably want to store all of your cables in them.
Flexicore®Cable
Heavy gauge wire is coiled around 49 strand wire rope and then heat treated. This cable has unequalled strength and the right amount of flexibility. It’s so tough, it has a one year warranty against defect or breakage.
- Additional Information
-
Additional Information
SKU 143153 Weight 34 Country of Manufacture Mfr. Model Number SV-B-WC Link to User Manual No Link to Schematics No Link To Catalog No Technical Specifications Motor:
All ball-bearing, double-insulated, reversible motor with variable speed control;
0 – 500 rpm.Drum:
Heavy gauge stamped aluminum with inner drum to prevent cable tangling.Capacity:
50 ft. of 1/4″ or 5/16″ cable; 35 ft. of 3/8″ cable.
All cables are left hand wound and reinforced with a wire rope center.Cutter Set:
Arrow Head, Boring Gimlet, Down Head Boring Gimlet, 1-1/4″ Side Cutter Blade, Flexible Arrow HeadCable Cartridges:
Light weight, impact resistant plastic.Slide Action Chuck:
Grip shield moves back to engage cable, forward to release it.
Automatically adjusts for different diameter cables.Free Shipping No