CS Unitec Plate Cutter, Carbide Tipped, 1-5/8" dia., 11" usable length, 13-1/2" overall length, 5/8"-11" hub thread size

CS Unitec Plate Cutter, Carbide Tipped, 1-5/8" dia., 11" usable length, 13-1/2" overall length, 5/8"-11" hub thread size Product Guide

The CS Unitec Plate Cutter is a carbide-tipped accessory designed to cut through steel plates, embedded rebar, and wire mesh when used with core drills. It addresses the challenge of drilling through materials that combine concrete and steel reinforcement, enabling faster and cleaner penetration through composite structures.

This cutter is commonly used in concrete drilling operations where cutting through both concrete and embedded steel is required. It fits onto compatible core drills via a 5/8"-11 thread hub and can operate effectively either wet or dry, depending on site conditions and slurry control preferences. Its carbide tip enhances durability and cutting efficiency, making it suitable for jobs where tough steel inclusions are part of the drilling path.

Where This Is Used

• Concrete cores containing embedded steel plates or rebar
• Construction and renovation sites where reinforced concrete drilling is necessary
• Industrial demolition projects requiring cutting through metal within concrete

Key Details

Selection Notes

When selecting a plate cutter for a core drill job, consider the embedded steel thickness and the diameter of the cutter needed to match the drill and project requirements. The carbide tipping is effective for cutting steel and reinforcing materials but confirming the cutter diameter fits the drill and job clearance is essential. Wet or dry use capability offers flexibility for worksite conditions—using water can assist in dust control and cooling, but may require slurry management plans. Verify the thread size on the hub matches the core drill spindle to ensure secure attachment and avoid tool damage.

Setup Notes

Confirm the core drill spindle has a 5/8"-11 hub thread to properly install this plate cutter. Check that the cutter's overall length (13-1/2") and usable cutting length (11") fit within operational clearance, especially when used with accessories or drill stems. If using wet, provide a steady water supply to cool the cutter and control dust while avoiding excess slurry accumulation around the work area. Inspect the cutter for carbide tip integrity before use to ensure cutting efficiency and prevent damage to the drill or workpiece.