CS Unitec Plate Cutter, Carbide Tipped, 10" dia., 12" usable length, 14-3/4" overall length, 1-1/4" x 7" hub thread size

CS Unitec Plate Cutter, Carbide Tipped, 10" dia., 12" usable length, 14-3/4" overall length, 1-1/4" x 7" hub thread size Product Guide

The CS Unitec Plate Cutter is a carbide-tipped cutting tool designed for attachment to compatible core drills. It addresses the challenge of cutting through steel plates, embedded rebar, and wire mesh found within concrete structures. This specialized cutter allows workers to efficiently breach metal components integrated in concrete substrates, a common need in renovation, demolition, or structural modification projects.

Typically used by contractors and rental professionals, this plate cutter is mounted on core drill machines to perform combined concrete and steel cutting operations. Its carbide tip ensures durability under abrasive conditions, making it suitable for both wet and dry cutting methods. When water is applied in small amounts, it helps control dust and cool the cutting surface, extending tool life. The cutter's dimensions and robust build accommodate tough jobsite use, frequently seen in industrial, commercial, and heavy infrastructure work.

Where This Is Used

• Cutting embedded steel components like rebar and plates within concrete walls and slabs
• Demolition and renovation projects requiring partial removal or modification of reinforced concrete structures
• Industrial or commercial facility maintenance where metal mesh or steel must be penetrated during coring

Key Details

Selection Notes

When choosing a plate cutter for combined concrete and steel cutting, confirm the hub thread size matches the core drill's spindle (in this case, 1-1/4" x 7). The 10" blade diameter and 12" cutting length provide a balance between reach and manageable size for common slab and wall thicknesses. Consider whether the job site allows wet cutting, which can help reduce dust and heat, extending the cutter's service life. The carbide tips are designed for durability but verify compatibility with the hardness and density of steel or mesh being cut to ensure appropriate wear rates. For projects involving dense rebar or thick plates, checking drill power and feed rate capacities will affect cutting speed and tool longevity.

Cutting Accessory Setup Notes

Ensure the cutter is securely attached to the core drill's spindle matching the 1-1/4" x 7 thread specification before use. Confirm the core drill system and operator are prepared for the additional load of metal cutting, which can differ from standard concrete coring. When wet cutting, supply a controlled water flow to lubricate the blade without oversaturating the work area. For dry cutting, monitor blade temperature to avoid premature carbide wear. Inspect the cutter regularly for carbide tip integrity and wear patterns. After cutting operations, clean any concrete slurry or metal debris from the cutter and mounting hardware to maintain alignment and performance on subsequent jobs.