CS Unitec Plate Cutter, Carbide Tipped, 11" dia., 12" usable length, 14-3/4" overall length, 1-1/4" x 7" hub thread size

CS Unitec Plate Cutter, Carbide Tipped, 11" dia., 12" usable length, 14-3/4" overall length, 1-1/4" x 7" hub thread size Product Guide

The CS Unitec Plate Cutter is a specialized cutting accessory designed for use with compatible core drills to address the challenge of cutting through steel plate, embedded rebar, and wire mesh typically encountered in concrete structures. Its carbide-tipped design enhances durability and cutting efficiency for demanding mixed-material drilling tasks.

This type of plate cutter is commonly used in construction and demolition projects where concrete elements incorporate steel reinforcement that must be penetrated or removed. It is fitted directly onto a core drill to allow simultaneous cutting of concrete and steel components. The cutter accommodates wet or dry cutting, helping control dust and extending the cutter life under varied site conditions. Durability and resistance to rough jobsite use are important when working in heavy-duty industrial applications.

Where This Is Used

• Concrete cutting projects involving embedded steel plates or rebar
• Demolition or renovation sites requiring cutting through reinforced concrete slabs
• Industrial maintenance or plant shutdown work that includes steel and concrete removal

Key Details

Selection Notes

When selecting a plate cutter for jobs involving concrete with embedded steel, the key consideration is compatibility with the core drill spindle thread and the cutter diameter sufficient for the required cut size. The 11" diameter cutter with carbide tips suits medium to large-scale steel cutting embedded in concrete. Confirm the core drill used can handle the cutter's dimensions and cutting demands. Wet cutting capability helps reduce dust and can extend tool longevity but requires water supply planning. The carbide tip is important for sustained performance when penetrating steel elements during drilling.

Plate Cutter Setup Notes

Verify the thread size on the core drill spindle matches the cutter hub thread of 1-1/4" x 7 for secure mounting. Inspect the cutter before use for carbide tip integrity and shaft straightness. If wet cutting, plan for steady water flow to the cutting surface to aid cooling and dust control; avoid excessive water that could flood the drill motor. For dry cutting, monitor dust accumulation to avoid premature wear. After use, clean the cutter of concrete slurry, dust, and debris to maintain performance. Because this cutter is designed to withstand rough usage, normal wear inspection routines should still be followed to avoid sudden failure during operation.