CS Unitec Plate Cutter, Carbide Tipped, 2-1/2" dia., 12" usable length, 14-3/4" overall length, 1-1/4" x 7" hub thread size

CS Unitec Plate Cutter, Carbide Tipped, 2-1/2" dia., 12" usable length, 14-3/4" overall length, 1-1/4" x 7" hub thread size Product Guide

The CS Unitec Plate Cutter is a specialized accessory designed to be used with core drills for cutting through tough materials such as steel plates, embedded rebar, and wire mesh encountered in concrete structures. Featuring a 2-1/2 inch diameter carbide-tipped blade and a robust 12-inch usable cutting length, it addresses the problem of efficiently penetrating steel elements integrated within concrete without needing separate cutting tools.

Commonly applied in construction, renovation, and industrial demolition projects, this plate cutter enables operators to combine concrete coring with steel cutting in a single pass. It is frequently used on jobsites where concrete slabs or walls contain reinforcing steel, allowing clean and controlled cuts of embedded metal during core drilling operations. The cutter supports both wet and dry use, providing flexibility depending on site water availability or slurry management considerations. Its sturdy carbide tips resist wear, helping to handle the rough conditions typical of construction environments.

Where This Is Used

• Cutting steel plates embedded within concrete slabs or walls
• Penetrating and trimming rebar to facilitate core drilling
• Removing wire mesh barriers during concrete coring

Key Details

Selection Notes

Selection focuses on matching the plate cutter’s thread size and diameter with the host core drill to ensure secure mounting and proper operation. The 2-1/2 inch diameter carbide tip thickness is designed for cutting embedded steel encountered in typical reinforced concrete. Consider whether the project requires wet or dry cutting, as the cutter supports both but wet use with minimal water improves dust and slurry control. Confirm that the 12-inch usable cutting length suits the embedded steel thickness and rebar arrangement to avoid exceeding blade capacity. Avoid using the cutter on metals or thicknesses beyond its design, which could damage the tool or reduce cutting effectiveness.

Compatibility and Setup Notes

Ensure the core drill being used has a hub thread size of 1-1/4" x 7 to allow proper installation of the plate cutter. The cutter must be securely tightened to avoid looseness during drilling. When selecting a core drill setup, verify that it provides sufficient power and rotational speed to cut through concrete and embedded steel simultaneously without excessive wear. For wet cutting jobs, arrange a water supply to minimize dust and cool the cutting blade but do not use excessive water flow that could interfere with electric components or slurry disposal. Inspect the carbide tips regularly for wear or damage, especially after heavy use or contact with highly abrasive materials. This plate cutter is intended for cutting embedded steel during concrete coring and is not suited for freehand steel cutting or use without the host core drill.