CS Unitec Plate Cutter, Carbide Tipped, 4-1/2" dia., 12" usable length, 14-3/4" overall length, 1-1/4" x 7" hub thread size

CS Unitec Plate Cutter, Carbide Tipped, 4-1/2" dia., 12" usable length, 14-3/4" overall length, 1-1/4" x 7" hub thread size Product Guide

The CS Unitec Plate Cutter is a carbide-tipped cutting tool designed to be used with core drills when a project involves drilling through concrete reinforced with steel elements. This cutter addresses the challenge of effectively cutting through steel plates, embedded rebar, or wire mesh encountered within concrete, enabling progress where standard masonry bits are insufficient.

Typically, this type of cutter is employed in industrial and construction settings where reinforced concrete structures must be penetrated for structural modifications, installations, or repairs. It can be used in wet or dry conditions, allowing flexibility depending on site water access and slurry management practices. Contractors and rental users select this cutter when encountering mixed material cores and require a durable solution that withstands abrasive usage and frequent contact with steel reinforcement.

Where This Is Used

• Cutting through steel plates embedded in concrete slabs or walls
• Drilling through reinforced concrete with significant rebar presence
• Projects involving core drilling for utility penetrations, structural modifications, or installations where metal mesh or wire reinforcement is present

Key Details

Selection Notes

From a selection standpoint, this plate cutter is appropriate when the drilling path includes significant steel elements that standard diamond bits cannot handle. The carbide tips allow the cutter to grind through steel plate, rebar, and wire mesh with controlled wear. When deciding between wet and dry use, consider site conditions; wet cutting helps manage dust and heat but requires water supply and slurry containment strategies. Confirm the core drill’s compatibility with the 1-1/4" x 7 threaded hub to ensure proper fit and torque transfer during cutting. The 4-1/2" diameter suits smaller to medium penetration sizes where embedded steel must be addressed alongside concrete.

Setup Notes

Before use, verify that the core drill spindle matches the cutter’s hub thread size to avoid cross-threading or improper mounting. For wet applications, set up a controlled water feed to the cutting area to improve blade life and minimize dust, but avoid excessive water flow that might lead to slurry buildup or tool slippage. Ensure operators have clear access and secure footing given the cutter’s length and the forces involved when cutting steel within concrete. After cutting, inspect carbide tips for wear or damage before reuse. Since this plate cutter withstands tough usage, routine cleaning and visual inspection support consistent performance. Note that sales are final, so planning around expected use duration and wear is important.