CS Unitec Plate Cutter, Carbide Tipped, 5" dia., 12" usable length, 14-3/4" overall length, 1-1/4" x 7" hub thread size

CS Unitec Plate Cutter, Carbide Tipped, 5" dia., 12" usable length, 14-3/4" overall length, 1-1/4" x 7" hub thread size Product Guide

The CS Unitec Plate Cutter is a specialized cutting accessory designed to fit core drills, made specifically to cut through steel plates, embedded rebar, and wire mesh. Its carbide-tipped design provides the durability needed to handle tough steel cutting tasks that arise during concrete drilling when metal reinforcement or other embedded materials are encountered.

This product is commonly integrated with core drills used in construction, demolition, or renovation work where concrete drilling intersects with steel structures. It allows professionals to efficiently cut steel components within concrete without switching tools, supporting combined concrete-steel drilling applications. The cutter is suitable for wet or dry use, offering flexibility in managing slurry and dust on different job sites.

Where This Is Used

• Cutting steel plates and embedded rebar within concrete structures.
• Drilling applications requiring both concrete and steel penetration, such as structural demolition or utility installations.
• Construction or renovation sites working with reinforced concrete slabs, floors, or walls.

Key Details

Selection Notes

When selecting this plate cutter, it is essential to confirm that the core drill used has the correct thread size (1-1/4" x 7) to match the cutter’s hub. The 5" diameter and 12" cutting length should be compatible with both the size of the steel reinforcement and the core drill capacity. This cutter is chosen when metal cutting needs to be integrated with concrete drilling to avoid tool changes and improve workflow efficiency. The carbide-tipped teeth are suitable for sustained contact with steel materials, but the cutter should be inspected for wear before each job, especially after dry-cutting operations. Wet use is permissible and can help with dust and slurry management, which may extend cutter life and improve cutting quality.

Setup Notes

Proper setup involves securely threading the plate cutter onto the core drill spindle using the specified 1-1/4" x 7 hub connection. Users should ensure the cutter is tightly fastened to avoid loosening during operation. When used wet, plan for appropriate water supply to control dust and slurry but avoid excess water that could affect tool handling or operator footing. For dry use, additional dust control measures such as vacuum attachments or respirators should be considered. Regular inspection of the carbide tips for chipping or wear is necessary to maintain performance. This cutter withstands rough usage but should be handled and stored carefully to avoid premature damage to cutting edges.