CS Unitec Plate Cutter, Carbide Tipped, 9" dia., 12" usable length, 14-3/4" overall length, 1-1/4" x 7" hub thread size

CS Unitec Plate Cutter, Carbide Tipped, 9" dia., 12" usable length, 14-3/4" overall length, 1-1/4" x 7" hub thread size Product Guide

The CS Unitec Plate Cutter is a specialized cutting accessory designed for use with core drills when working with mixed materials that include steel components embedded in or alongside concrete. Its carbide-tipped cutting edge allows effective cutting through steel plates, embedded rebar, and wire mesh encountered during concrete drilling operations. This accessory helps solve the common challenge of efficiently penetrating metal reinforcements without switching tools, ensuring continuity and speed in construction and demolition tasks.

In practice, this plate cutter is mounted onto compatible core drills, converting the drill into a more versatile cutting tool. It enables operators to cleanly cut steel and mesh during or after concrete core drilling. It can be used with a small amount of water for cooling and dust suppression or applied dry if site conditions require. The cutter is built to withstand the rigors of typical jobsite usage, making it suitable for heavy-duty cutting tasks associated with embedded steel fastening and reinforcement.

Where This Is Used

• Concrete drilling projects involving steel reinforcements, such as cutting embedded rebar or steel plates
• Construction and demolition sites where mixed material cores need to be separated or trimmed
• Industrial maintenance or retrofit projects requiring modification of steel mesh or plate within concrete structures

Key Details

Selection Notes

When selecting a plate cutter for use with a core drill, confirm the thread size compatibility with the drill hub to ensure secure attachment. The 9-inch diameter offers a balance between cutting capacity and maneuverability for embedded steel components commonly found in concrete. Consider whether wet cutting is preferred or possible at the jobsite, as introducing water helps reduce dust and wear on the cutter. For projects involving various steel thicknesses or mixed material cores, this cutter's carbide-tipped design provides durability against tough metals. Keep in mind the overall length and usable cutting length to ensure the cutter reaches embedded material without interference.

Plate Cutter Setup Notes

Verify the core drill spindle accepts a 1-1/4" x 7 threaded hub for proper mounting of the cutter. When using wet cutting methods, provide a controlled water supply to the cutting interface to minimize dust and prolong tool life. Dry cutting is feasible but may accelerate wear or dust generation, so plan for adequate dust control measures. Inspect the cutter regularly for carbide tip wear or damage, especially when cutting highly abrasive or thick steel. Confirm enough clearance around the drill for the cutter's 14-3/4" overall length and 12" usable cutting length to operate without obstruction. After use, clean the cutter to remove any metal debris or slurry, maintaining cutting performance and longevity.