Sava 60425 20"-40" Multi-Size Inflatable Pipe Plug

Sava 60425 20"-40" Multi-Size Inflatable Pipe Plug Product Guide

Pipe Plug Selection Notes

From a selection standpoint, verify the nominal pipe diameter falls within the 20" to 40" range covered by this multi-size inflatable plug. The combined NR-SBR rubber with Kevlar tire cording construction supports industrial use, but confirm the pipe’s material condition for potential abrasion or irregularities. Backpressure ratings must be checked against the size-specific chart or manual since the plug is test-designed to three times its working inflation pressure. This confirms the plug meets pressure containment needs for buildings and factory piping.

Pipe Access And Setup Planning

Inspect the plug carefully before deployment for cuts, abrasions, or rubber damage, as these can lead to failures even if not full-thickness. Use a protective sleeve if the pipe surface is rough or abrasive to prevent premature wear during insertion or retrieval. Inflate the plug to the specified working pressure and maintain that pressure with periodic monitoring throughout use; do not leave the plug inflated and unattended for extended periods. Blocking or restraining methods should be planned in accordance with user manuals to handle anticipated backpressure during use.