Unibor E5000 LP Electric Magnetic Drill

Unibor E5000 LP Electric Magnetic Drill Product Guide

The Unibor E5000 LP is a compact electric magnetic drill designed for drilling in low-clearance and confined spaces where standard magnetic drills cannot fit. It addresses the challenge of securely and accurately drilling through ferrous metals in tight work areas such as between beams or inside structural members commonly found in fabrication, construction, shipyards, and industrial maintenance.

This type of magnetic drill is commonly employed on-site or in shops requiring precision and stability without sacrificing drilling power. Equipped with a 1500 W motor and a 2-speed gearbox, users can adjust torque and speed to suit cutter size and material thickness. The magnetic base firmly affixes the tool to the workpiece, reducing movement during cutting and enabling operations such as annular cutting, twist drilling, and countersinking on structural steel components.

Where This Is Used

• Fabrication shops working on steel assemblies
• Construction sites requiring on-structure hole drilling
• Shipyards performing metal component cutting and maintenance
• Industrial maintenance and repair jobs in confined machinery spaces

Key Details

Selection Notes

From a selection standpoint, confirm the available clearance around the drilling area since this model is designed specifically for tight spaces where larger mag drills may not fit. Consider the maximum cutter diameter and depth needed, as the E5000 LP handles up to 2-inch cutters with a 2-inch cut depth, suitable for many structural steel drilling applications. The magnetic base requires a clean and flat ferrous surface to hold securely, so surface preparation may be necessary. The 2-speed gearbox allows adjustment, so selecting the correct speed-to-torque ratio based on steel thickness and cutter size will help optimize cut quality and tool life. This drill is also practical when multiple drill methods are needed—such as twist drilling or countersinking—in addition to core drilling.

Drill Setup Notes

Ensure the magnetic base is positioned on a flat, clean ferrous surface free of rust, oil, or debris to maximize holding force and drilling accuracy. Verify power supply compatibility and adequate motor rating (1500 W) for the intended work. Check cutter compatibility, confirming tooling supports the diameter and depth capacity. Plan access routes for power cord management due to the portable design, especially in confined spaces. The 2-speed gearbox should be set appropriately: lower speed for larger cutters or thicker material requiring higher torque, and higher speed for smaller cutters or lighter gauge steel. After drilling, clean metal chips and debris from drill surfaces and check for wear or loosening of mounting and cutter connections before the next use.