Joint Zone 25SP 2.5" Submersible Hydraulic Pump

This submersible centrifugal design requires no priming and can run dry all day without damage. Direct drive requires no maintenance as all moving parts are self lubricated with passing hydraulic fluid. A semi closed designed stainless steel impeller will not corrode and will draw down water to a depth of only 1 inch. The JZ-25SP is fitted with flush face coupler that threads directly into SAE ports, No Npt hydraulic joints to weep. The JZ-25SP Water Pump comes with a 2-1/2” female NPT output port fitted with a 2-1/2” Cam Loc fitting standard.

WARRANTY - Submersible Pumps and their associated parts are warranted against defects in material and workmanship for a period of twelve months from the date of purchase. Repair or replacement of defective parts will be approved by manufacturer. This warranty becomes void if maximum pressures or flows are exceeded. Back pressure should be measured at the tool before being used. Excessive back pressure will damage shaft seal.