Sava 77679S16 Blue inflation hose, 16 ft, Nytrile with SAE couplers

Sava 77679S16 Blue inflation hose, 16 ft, Nytrile with SAE couplers Product Guide

Inflation Hose Selection Notes

The Sava 77679S16 inflation hose is used for pneumatic applications requiring a flexible, air line. From a selection standpoint, compatibility with the inflation system fittings is crucial; these hoses use SAE couplers and a 3/8" I.D. compatible for temperatures ranging from -40°F to 212°F, the nitrile construction confirms resistance to oil and fuel exposure, making it applicable for industrial environments where such fluids may be present. The fiber-reinforced braid provides burst pressure capability to at least 1,000 psi, which should be confirmed as sufficient for the planned inflation pressure.

Setup And Use Planning Notes

When planning hose deployment, verify the hose length fits the setup without excessive tension or kinks and confirm clean compressed air free of moisture reaches the hose to avoid damage. Route the hose away from sharp edges or hot surfaces that could compromise the tubing or connectors. The nylon sheath and nitrile inner tube require inspection before use to confirm no cuts or abrasions are present, which could lead to failure under pressure. After use, inspect the couplers and hose for wear or contamination, and store the hose in a clean, dry location to maintain flexibility and prevent accelerated aging.