Sava 60599 12"-21" Multi-Size Inflatable Pipe Plug

Sava 60599 12"-21" Multi-Size Inflatable Pipe Plug Product Guide

Pipe Plug Selection Notes

When selecting the Sava 60599 multi-size pipe plug, confirm the pipe diameter falls within the 12" to 21" range covered by the model. The plug’s construction from NR-SBR rubber reinforced with Kevlar cording is suited to moderate industrial blocking applications but verify the pipe surface condition, as rough or irregular pipe interiors may require a protective sleeve for insertion and sealing. Confirm backpressure against the size-specific chart or manual for the selected pipe diameter, and keep that check separate from the specified inflation pressure. The standard 1/4" inflation fitting is compatible with common inflation equipment used on-site.

Inflation And Blocking Planning

Inspect the plug before use for any cuts, abrasions, or rubber damage, as even minor surface faults can affect inflation performance. If pipe conditions are abrasive or irregular, plan to use a protective sleeve to reduce wear during deployment and retrieval. Inflate the plug to the specified pressure and maintain that pressure throughout the operation by monitoring the inflation fitting; these plugs should not be inflated and regularly monitored for extended times. Consider how to brace or block the plug in place according to site procedures, taking care to understand the expected backpressure and pipe orientation.