Please wait...
The Tehma PP700E High Pressure Hydraulic Power Pack supplies hydraulic power through an innovative two-stage pump, which allows connected hydraulic tools to operate at increased speeds and higher work rates. It supports hydraulic tools requiring high pressure and rapid actuation common in demolition and construction applications.
This unit is offered with two power source options: a 3Hp single-phase electric motor suitable for indoor or controlled environments with standard 230V/110V supply, and a 5Hp gasoline engine configuration to support outdoor jobsites without electrical service. The dual motor options provide configuration options depending on power availability and site conditions.
Compared to standard hydraulic power units that use single-stage pumps, this power pack’s two-stage pump provides increased hydraulic flow responsiveness that benefits tasks with rapid tool cycling or multiple tool usage scenarios. The built-in Cooling System 2.0 addresses oil temperature buildup, extending hydraulic tool run times in demanding or hot ambient environments beyond typical units in this category.
This hydraulic power pack ships by freight typically on a pallet and may require a loading dock, forklift, or liftgate for delivery and pickup. Because this unit is not currently available for rent, purchasers should allow lead time accordingly.
When using the gasoline motor version outdoors, position the unit and exhaust muffler away from the immediate work face and any heat-sensitive surfaces such as fiberglass or coatings to prevent damage. The electric motor configuration requires 230V or 110V power and avoids exhaust concerns but depends on an available electrical supply.
Long hydraulic hose runs can introduce friction loss that may reduce effective flow and pressure. Planning hose length and diameter is important to maintain specified tool performance, particularly for higher-demand hydraulic tools connected to a single circuit.
For jobsites near water, municipal, or environmentally sensitive locations, confirm hydraulic fluid requirements in advance. The Cooling System 2.0 can mitigate fluid temperature rise, but care should be taken with hydraulic oil selection and containment on sensitive sites. RTO does not guarantee the type of hydraulic oil in this sale-only unit unless specified prior to purchase.
The unit is available with two different motors, a versatile 3Hp single-phase electric motor, ideal for indoor demolition as it can be plugged to a traditional 230V/110V household power, or a 5Hp gasoline engine for outdoor uses.
The innovative two-stage pump is a further element of distinction of the unit and ensures performance well above the category. This allows to speed up to the maximum the tools connected and significantly improve the work rate and consequently the productivity.
The high efficiency cooling system 2.0 drastically contrasts the oil overheating and cuts it down by about 60%, compared to ordinary power units on the market.
This ensures maximum performance of the power pack, also in the hottest climates and a better usability of the tools connected even with the more demanding and prolonged applications.
| SKU | 142968 |
|---|---|
| Weight | 129 |
| Country of Manufacture | Italy |
| Mfr. Model Number | PP700E |
| Link to User Manual | No |
| Link to Schematics | No |
| Link To Catalog | No |
| Technical Specifications | No |
| Free Shipping | No |
 |
 |
|
