More Views
Now with its large, brightly colored display; the Cygnus DIVE provides clear viewing from all angles for divers and their cameras, even in poor visibility. This robust, wrist-mountable, underwater, ultrasonic, metal thickness gauge has been designed for the professional diver and can be worn on the forearm, providing an invaluable free hand while performing metal thickness measurement surveys underwater. As with all Cygnus products, the DIVE Underwater Thickness Gauge has been designed for easy operation, and with only two buttons to operate, provides quick and easy menu navigation using just one hand.
Rated to a depth of 300 meters, the DIVE delivers accurate meter readings, is reliable and simple to use. Topside Repeater can also overlay the real-time thickness measurement on to a composite video signal, displaying it on the monitor screen / video recording of the survey.
The Multiple Echo technique is at the heart of the electronics and ensures coatings up to 20mm thick are ignored and that measurements are automatically verified. The DIVE can measure through corrosion and through coatings up to 20mm thick (when in ‘Deep-Coat’ mode) using the Single Crystal Probe Option. The introduction of Twin Crystal Probe Option for use with the gauge in single-echo mode offers flexibility for specific situations where there are no protective coatings. These applications include uncoated surfaces with extreme front and back wall corrosion, anchor chain links and highly attentive materials such as cast iron.
The new CygLink v4 software offers a wide range of options for recording and displaying measurements. On-Board Data Logging Capability adds data logging capability to the gauge, supplied with CygLink software for data transfer and measurements can be recorded in either a linear or grid format.
- Description
-
Details
Features:
- Wrist mountable giving the diver a free hand
- Large, brightly colored AMOLED display, highly viewable by diver and camera in poor visibility
- A-Scan display to assist with measurement verification
- Auto-Log Data Logging - option, no log button to press - stores up to 5,000 measurements with A-scans
- Multiple Echo means no need to remove protective coatings up to 20 mm (0.787") thick
- Error-checked Multiple Echo measurements to ensure genuine, verified measurements are displayed
- Deep Coat mode to measure through coatings up to 20 mm (0.787") thick
- Single Echo mode with twin crystal probes
- Probes are connected to the DIVE with a coiled double jacket cable which will extend up to 1 meter (3 ft)
- Pressure tested to 300 meters (1,000 ft)
- Rechargeable Lithium-Ion battery giving up to 11 hours continuous operation.
Cygnus Dive Specifications:
- Size: 4.1 in x 4.3 in x 1.4 in (105 mm x 110 mm x 35 mm)
- Battery Life: Rechargeable Lithium-Ion Battery Pack, 10 hours
- Weight in Air: Complete Gauge 2 lb. (905 g)
- Operating Temp: 14°F to 122°F (-10°C - +50°C)
- Measurement Range:
- 0.120 in.- to 9.995 in. (3 mm - 250 mm) in Steel with 2.25 MHz probe
- 0.065 in.- to 6.000 in. (2 mm - 150 mm) with 3.5 MHz probe
- 0.045 in.- to 2.000 in. (1 mm - 50 mm) with 5.0 MHz probe
- Accuracy -
- ±0.002 in. (±0.05 mm) High Resolution (<4 in)
- ±0.005 in. (±0.1 mm) Low Resolution
- Display: 2.4 in. Color TFT with LED Backlight 320 x 240 pixels
- Receiver: Automatic TCG, 1 to 10 MHz Bandwidth 10 Bit Digitizer 60 MSPS
- Data Storage: 32 Mb Flash Memory (5000 Measurement Points)
- Warranty: 3 years on DIVE Gauge, 6 months on Probe
- Data Output: RS-485 Half Duplex to DIVELink
- Certification: BS EN 15317:2007
- Depth Rating: IP68 Rated to 984 feet (300 m) continuous immersion in sea water
S2C Probe Information:
The performance of any ultrasonic thickness gauge relies heavily on the probe and its suitability to the material being measured. Therefore, selecting the right probe is vital. All Cygnus’ probes are made from stainless steel and have a hard wear face or a wear membrane to protect the probe.
Includes:
- Integral coiled double-jacket cable.
- Rugged locking connector.
Features:
- All round measurement of wall thickness with corrosion through coatings.
- Used in multiple-echo mode.
- Require no zeroing and have a high linear accuracy.
Specifications:
- Type: Single crystal probe
- Frequency: 2.25 MHz
- Tip size: 13mm/0.5 in.
- Range in Steel: 0.120 in/3mm - 10 in./250mm
- Connectors: BNC
- Color: Red band
- Material: Stainless steel
Cygnus DIVE Underwater Thickness Gauge Kit Includes:
- (1) Dive Body
- (1) Cygnus DIVE Underwater Thickness Gauge
- (2) Rechargeable Lithium Ion Batteries
- (1) Fast Battery Charger
- Spare Membranes
- (1) Surface and Membrane Couplant
- (1) Lanyard
- (1) Spare Screen Protector
- (1) Test Block
- (1) Carrying Case
- (1) User Operating Manual on USB Flash Drive
- (1) S2C Probe
- Additional Information
-
Additional Information
SKU 141644 Weight 1 Country of Manufacture Mfr. Model Number 001-7200/3 Link to User Manual No Link to Schematics No Link To Catalog No Technical Specifications No Free Shipping No
